How Much Does Media Blasting Cost In Toronto?

Media blasting is a process used to clean, strip, or prepare a surface by using a high-pressure stream of abrasive material. There are various types of media blasting techniques, including dry ice blasting, soda blasting, sandblasting, and bead blasting. Each technique uses a different type of abrasive material and has unique advantages and disadvantages.

On average, the cost of media blasting in Toronto ranges from $2.50-$4 per Square Foot. However, the cost can be higher or lower depending on the factors mentioned above.

The cost of media blasting will depend on the type of media blasting you need.  Each type of media blasting uses a different type of abrasive material, and the cost of each type can vary.

The size of the surface is another factor that will impact the cost of media blasting. Larger surfaces will require more time and materials, and therefore, the cost will be higher.

The complexity of the job is also a factor that will impact the cost of media blasting. If the surface has intricate designs or curves, it may require more time and skill to media blast, and the cost will be higher.

Dry Ice Blasting

Dry ice blasting is a cleaning process that uses solid carbon dioxide (CO2) pellets as the blasting media. The process is also known as CO2 blasting, dry ice cleaning, or cryogenic blasting. Dry ice blasting is an environmentally friendly and non-abrasive cleaning method that can be used to remove a wide range of contaminants from surfaces without damaging them.

Dry ice blasting is effective in removing a wide range of contaminants, including grease, oil, paint, ink, mold, and bacteria. It is also a safe and eco-friendly cleaning method as it does not use any solvents or chemicals, does not create any secondary waste, and does not generate any harmful fumes. Dry ice blasting can be used in a wide range of industries, including automotive, food, aerospace, and electronics, and is often used for cleaning delicate and hard-to-reach areas.

Soda Blasting

Soda blasting is a process that uses sodium bicarbonate (baking soda) as the abrasive material. The soda particles are propelled by compressed air or water and impact the surface, removing any dirt, rust, or paint. Soda blasting is a less aggressive technique compared to sandblasting and is less likely to damage the surface being cleaned. Also, soda blasting does not create dust, which makes it safer to use. However, soda blasting is not suitable for heavy-duty cleaning tasks.

Sand Blasting

Sandblasting is a process in which a high-pressure stream of sand particles is used to clean or prepare a surface. The sand particles are propelled by compressed air or water and impact the surface, removing any dirt, rust, or paint. Sandblasting is a highly effective technique, but it has some disadvantages. The sand particles can be harmful to breathe and can cause lung problems if inhaled. Also, sandblasting can create a lot of dust, which can be a health hazard.

Bead Blasting

Bead blasting is a process that uses small spherical beads as the abrasive material. The beads are propelled by compressed air or water and impact the surface, removing any dirt, rust, or paint. Bead blasting is a less aggressive technique compared to sandblasting and is less likely to damage the surface being cleaned. Bead blasting is often used for cleaning delicate surfaces such as aluminum or stainless steel. However, bead blasting is not suitable for heavy-duty cleaning tasks.

The cost of media blasting in Toronto can vary greatly depending on several factors, such as the size of the surface, the type of media blasting, and the complexity of the job. Restoration Mate is a Toronto based restoration company that specializes in Dry Ice and Soda Blasting.